Over-The-Road Trucks

Bumper-to-Bumper Protection

Fast Freight, Quality Product

From engine oils and bearing greases to system coolants, Jubitz provides premium products for all your over-the-road trucking needs. Keeping your fleet ready for the next run is what we do best, that’s why we deliver next-day to your job site! Our concierge team works to understand your business and will find a way to save you money and time! With an A+ team by your side, and the industry’s best products, we pride ourselves on being an all-in-one package for all of our customers. It’s our business to get you what you need before you need it. Give us a call or fill out a form to get a custom quote for your specific needs.

 

Grease Points, Rods, Pins & Bearings

Routine grease application to your truck’s rods, pins and bearings will help your vehicle last longer and go farther on those long hauls. Jubitz’s high-quality products maintain a vehicle’s heavy-duty components for all your fleet’s needs. With your fleet carrying heavy loads at high speeds in a wide variety of environmental conditions, they need the best products to maximize their longevity!

Chevron Starplex

  • Extreme Pressure Protection
  • Good Water Resistance
  • Protection Against Shock Loading

Additional Specs

Chevron Ultra-Duty Grease EP

  • Load-Carrying Protection
  • Maximum Service Lubricant
  • Shock Load Protection

Additional Specs

Delo Syn-Grease SF

  • High temperature stability up to 190°C (375°F)
  • Low temperature lubrication down to -45°C (-50°F)
  • Anit-Wear Properties
  • Rust Protection

Additional Specs

Delo Syn-Grease Moly 5%

  • Corrosion and Wear Protection
  • Water Resistant
  • Shock Load Protection
  • Performance Across A Wide Temperature Range

Additional Specs

Transmission Fluid

Delo Syn-Trans XE 

75W-90

  • Extended Drain Capabilities
    Provides on-highway drain intervals of 500,000 miles in on- highway Eaton medium and heavy duty transmissions, including automated manual transmissions (AMT), and 500,000 miles for older model Eaton Heavy Duty Manual Transmissions.
  • Excellent Thermal and Oxidation Stability
    Formulated for high temperature performance and excellent oxidation resistance to protect against sludge, varnish, lacquer and harmful deposit buildup in critical transmission components.
  • High Viscosity Index and Low Pour Point

    Excellent low temperature performance allowing for rapid circulation of the fluid for easier start up and reduced stress on the transmission components.

    Additional Specs

Delo Syn ATF HD

  • Extended Drains
  • Fast Circulation During Cold Weather
  • Optimized Friction Characteristics
  • Engine Protection

Additional Specs

Delo Syn-Gear XDM SAE

75W-90

  • Extended Drain Capabilities
    Meet the requirements of major axle manufacturers for extended drains.
  • Excellent Thermal and Oxidation Stability
    Synthetic hydrocarbon base oils provide outstanding stability.
  • High Viscosity Index and Low Pour Point

    Synthetic hydrocarbon base stocks provide extremely broad operating temperature ranges when compared with conventional mineral oil based lubricants.

    Additional Specs

Delo Gear ESI

80W-90

  • Minimal Wear
    Delo Gear ESI are formulated to promote long life for gears, bearings, and seals.
  • Seal Compatibilty
    Seal materials are not adversely affected by Delo Gear ESI at temperatures as high as 163°C (325°F).
  • Low Operation Temperatures

    Unique additive chemistry minimizes friction resulting in cool operating temperatures.

 Additional Specs

Engine Oil

Your engine is the powerhouse to the whole operation, and keeping it well oiled will help maintain optimal performance when heavy duty jobs call. Using a product that is specifically designed for your engine’s needs will breathe new life into your machinery’s performance. Many of our products are formulated to lower CO2 emissions and improve fuel economy, so saving money can feel even better!

Delo 400 XSP 

5W-40

  • Low Viscosity Full Synthetic Base Stock
    Promotes consistent cold engine starting for gasoline and diesel engines operating in sub-zero temperatures.
  • Minimized Operating Costs
    Exceptional soot dispersancy and wear control protect the cylinders, pistons, rings, and valve train components against wear and corrosion, promoting optimum service life and minimal maintenance. Contributes to maximum vehicle utilization and minimal downtime.
  • Excellent Emission Control System Life

    Promotes optimum Diesel Particulate Filter (DPF) life for minimal downtime and cleaning, thus minimizing maintenance costs.

Additional Specs

Delo 400 XLE SAE 10W-30

  • Improved Fuel Efficiency
    Up to 1% improvement vs. SAE 15W-40 oils in Class 8 diesel engine bench testing.
  • Better Low Temperature Pumpability
    Improved flow rate and pumpability versus SAE 15W-40 oils.
  • Exceptional Deposit Control

    Provides high performance piston deposit control and turbocharger protection due to its superb oxidation performance. Its high performing detergent and dispersant additives allows for extended diesel engine component protection.

Additional Specs

Delo 400 XLE SAE 15W-40

  • Exceptional Deposit Control
    Provides high performance piston deposit control and turbocharger protection due to its superb oxidation performance. Its high performing detergent and dispersant
    additives provide excellent diesel engine component protection.
  • Better Low Temperature Pumpability
    Improved flow rate and pumpability versus conventional SAE 15W-40 oils and similar pour point to conventional SAE 10W-30 products with better cold flow properties than conventional SAE 15W-40 products.
  • Superb Long Drain Performance
    Formulated for exceptional long oil drain protection for both on and off-road diesel engines.

Additional Specs

Delo 400 SDE 15-W40

  • Minimized Operating Costs
    Exceptional soot dispersancy and wear control. Cylinders, pistons, rings, and valve train components are well protected against wear and corrosion, providing optimum service life and minimal maintenance. Contributes to maximum vehicle utilization and minimal downtime.
  • Excellent Emission Control System Life
    Provides optimum Diesel Particulate Filter (DPF) life for minimal downtime and cleaning, thus managing your maintenance costs.
  • Managed Inventory Control

    Backward compatible with previous API Oil Service Categories and engine models. Suitable for use in four-stroke gasoline and naturally aspirated, turbocharged and modern electronically controlled/low emission diesel engines calling for an SAE 15W-40 heavy duty motor oil. Allows users with a wide mix of engine brands to enjoy simplified inventory and dispensing systems that may contribute to saving money, space and handling time.

Additional Specs

Delo 400 SDE 10W-30

  • Improved Fuel Efficiency
    Up to 1% improvement vs. SAE 15W-40 oils in diesel engine testing1.
  • Minimized Operating Costs
    Exceptional soot dispersancy and wear control. Cylinders, pistons, rings, and valve train components are well protected against wear and corrosion, providing optimum service life and minimal maintenance. Contributes to maximum vehicle utilization and minimal downtime.
  • Excellent Emission Control System Life

     Provides optimum Diesel Particulate Filter (DPF) life for minimal downtime and cleaning, thus managing your maintenance costs.

Additional Specs

Engine Coolants

Keeping your heavy-duty engine cool is no small task. An over-worked engine on a hot, summer day is a recipe for disaster. Using a quality coolant will keep your engine from being damaged during those longs days on the road, and can save your team time and money on machine maintenance. Jubitz provides some of the industry’s best coolants for heavy-duty engines, and we even deliver next-day!

Delo ELC Antifreeze/Coolant 50/50

  • Excellent Hardware Life
    Improved liner pitting performance than previous generation ELC coolants. Delo ELC Advanced shows significant improvement in surpassing the ASTM D 7583 John Deere coolant cavitation test.
  • Variable Applications
    Recommended for use in on-road, off-road and stationary engine applications that call for an extended life, silicate and phosphate free formulation that contains nitrite and molybdate. Can be used in engines using variable fuel types and variable emission control protocols. Check with your OEM for specific product application requirements.
  • Optimal Cooling System Operation

    No gel or deposit formation. Silicates and other SCA deposits can reduce heat transfer and increase downtime due to over-heating.

Additional Specs

Havoline Conventional Antifreeze/Coolant

  • Wide Service Application
    These silicate containing products can be used in a wide variety of automotive vehicles where a low silicate product is required. It can also be used in heavy-duty engines when SCA’s are added. These products are also suitable for use in industrial internal combustion engines where an antifreeze/coolant is required to provide protection against freezing, boil-over, and corrosion.
  • Service Life
    2 years or 50,000 miles (80,500 km) in automotive service or up to 250,000 miles (400,000 km) in heavy duty service when supplemental coolant additives are used and correct top up practices are followed.
  • Wide Temperature Application

    Protects against winter freeze up and minimizes the chances of summer boil-over.

Additional Specs

Want to know more?

Want to know what you need for your hydraulic truck’s engine or gears? Check out our pages on…

Light Duty Truck Equipment  Agriculture Equipment  Construction Equipment

Or contact a consultant about your specific needs!